Wiko View 5 USB Driver helps you to connect your Wiko Device to the Windows Computer and transfer data between the device and the computer. It also allows you to Flash Wiko View 5 Stock Firmware on your Wiko Device using the preloader drivers. Here on this page, we have managed to share the official Wiko View 5 USB Driver.
It is very necessary to have Wiko View 5 USB drivers whenever you have to connect Wiko View 5 to the Pc for the purpose of transferring data or important files. Also, when it comes to updating your Wiko View 5 manually, it’s necessary to have them on your PC. While you are installing or flashing Fastboot firmware on the device, then Wiko USB Drivers are required. Check out the download links given in this post to simply keep up the pace in this matter.
Wiko View 5 Mediatek Driver for Windows (11,10,8,7, XP)
- Driver Package Name: Mediatek Driver for Windows
- Package File Name: Mediatek_Driver_Auto_Installer_v1.1352_(USB-Driver.NET).zip
- Driver File Size: 10 MB
How to install Wiko View 5 Mediatek Driver on Windows
Wiko View 5 Mediatek Driver is compatible with the SP Flash Tool, MTK Flash Tool, SP MDT Tool, and the SN Write Tool and can be useful if you are trying to install firmware (ROM) on the Wiko View 5.
Step 1: Download and extract Wiko View 5 Mediatek Driver Auto Installer package on the Computer. If in case, you have already downloaded and extracted the driver package, then SKIP this step.
Step 2: Once you have extracted the driver package, you will be able to see the following files:
Step 3: Open Install Drivers.bat to Launch the Setup Dialog Box:
Step 4: Once the Driver Setup Dialog Box is Launched, you will be able to see the following window:
Step 5: Now, Press any Key (from the keyboard) to begin the installation process.
Step 6: Once the installation process is completed, you will be able to see the Driver installation Completed Message:
Step 7: Now, Press any Key (from the keyboard) to exit the Setup Window.
Step 8: Restart your Computer:
Step 9: Once the Computer is restarted, you can easily connect your Wiko View 5 MediaTek to the computer without facing any issues.
Wiko View 5 ADB Driver for Windows (11,10,8,7, XP)
- Driver Package Name: Android ADB Driver for Windows
- Package File Name: usb_driver_r13-windows_(USB-Driver.NET).zip
- Driver File Size: 8.27 MB
How to install Wiko View 5 USB drivers
The Wiko View 5 USB driver makes almost every task that needs to be performed by connecting the device to PC easier. All the files can be transferred in no time without worrying about anything. Also, there are certain benefits to having it. Before you proceed to download, it is suggested to you remove the previously installed Wiko View 5 from your PC case you have installed it. Once you are done, click the below link to download Wiko USB Drivers on your PC.
How to install Wiko View 5 ADB Driver on Windows
Wiko ADB Driver can be used to connect the Wiko to the computer and transfer data between the mobile and the computer.
Step 1: Download and extract Wiko View 5 ADB Driver (.inf based) (The link is above) on the Computer. If in case, you have already downloaded and extracted the driver, then SKIP this step.
Step 2: Open Device Manager on the Computer. Press Win + R key from the keyboard and type devmgmt.msc and Click on the OK Button:
Step 3: Once the Device Manager is Launched, Click on the Computer Name name can vary from the image below):
Step 4: Click on the Action Menu and Select Add Legacy Hardware option:
Step 5: Under Add hardware Dialog Box, Click on the Next Button:
Step 6: Tick on the Install the hardware that I manually select from a list checkbox and Click on the Next Button:
Step 7: Click on the Next Button:
Step 8: Then Click on the Have Disk Button:
Step 9: Click on the Browse Button:
Step 10: Locate the .inf file from the computer (this file can be found in the extracted driver folder).
Step 11: Click on the OK Button:
Step 12: Click on the Next button:
Step 13: Again Click on the Next button:
Step 14: Click on the Finish button to complete the installation process (ignore Code 10; it will be gone post restarting the computer).
Step 15: Your Wiko View 5 driver is listed in the Device Manager.
Step 16: Now, Restart the Computer. Once the computer is restarted, you can easily connect your Wiko View 5 device to the computer.