Lava Z33 LEX402 Flash File Firmware

Lava Z33 LEX402 Flash File

Lava Z33 LEX402 Firmware Flash File Can Solve All Types Of Software-Related Problems on Your Lava Z33 Android Device. This LEX402 Firmware Will Resolve the FRP Lock After a Hard Reset, Unfortunately, the System App Has Stopped, BaseBand Unknown, Automatically restarting, After Flash Fastboot Mode, Dead Recovery, Pin Lock, Password Lock, Pattern Privacy Lock, LCD White Or Blank After Flashing the Wrong File And any other software issues.

Download Lava Z33 LEX402 Flash File:

Pre_Requirements:
  • Phone Model Support: Lava Z33 LEX402
  • Make sure your battery is at least 60 percent charged.
  • make sure you take a backup of your data before flashing.
  • Download the USB Driver and Flash Tool

How to install Firmware on Lava Z33 lex402:

  • Unpack downloaded firmware using 7zip
  • Install the Mediatek Vcom driver on your computer
  • Disable SLA Authentication by following this guide (if not disabled you may face a BROM error)
  • Download and extract smartphone flash tools on your computer
  • From the flash tool folder Run flash_tool.exe
  • Go to the Download tab Click Scatter and Load Scatter File from the ROM folder
  • Repeat the Process and load DA and Auth files from the drop-down Select ‘Download only
  • Click ‘Download’
  • Turn Phone OFF
  • Now together Press the Volume up + down key and insert the USB.
  • You will see a yellow flashing bar with a flashing process.
  • Once done, unplug the device and switch it ON

Note: Please do not use this firmware for any other device.

LEAVE A REPLY

Please enter your comment!
Please enter your name here