on this page, we have shared Oppo Reno 10 Pro 5G CPH2525 Flash File Firmware with the installation guide. To install the flash file, we need software called QFil Flash Tool which can be helpful to flash the stock ROM on your device. The method is simple and easy. We have also added video and step-by-step tutorials to make things easier to flash the official flash file.
This process is helpful if you have bricked your device, lag, or shuttering performance, fix the Bluetooth and WiFi issues, and unroot or bypass the FRP lock. For Know the Firmware Version dial *#899# in emergency dial.
Oppo Reno 10 Pro Overview:
The Oppo Reno 10 Pro 5G supports a 6.7-inch full-HD+ OLED 3D curved display, with a refresh rate of 120Hz. it’s powered by an octa-core Snapdragon 778G 5G SoC with up to 12GB of RAM, which can be expanded to 8 GB. It also features up to 256GB of UFS 3.1 storage, and an under-display fingerprint sensor with face unlock.
Its camera system includes a 50-megapixel a 32-megapixel and an 8-megapixel wide-angle camera. a 32-megapixel selfie camera is also found on the front. The device comes with a 4,600mAh battery with 80W SuperVOOC flash charging support.
Download Oppo Reno 10 Pro 5G CPH2525 Firmware Files:
Pre-Requirements:
- Supported device: Oppo Reno 10 Pro
- Make sure to charge your device more than 50%
- It would help to have a PC or Laptop with a USB cable.
- Take a complete backup using any method given below
- Download Qualcomm USB drivers, QFil Flash Tool, and Oppo USB Drivers.
How to Install Firmware on Oppo Reno 10 Pro:
- Download the firmware, Flash Tool, and extract.
- Install the Oppo Qualcomm-MTK driver on the computer.
- Double-click on MSM Download Flash Tool.
- Launch the tool, and click Start All.
- Switch off the mobile and connect to the PC.
- Press the volume up and down for successful flashing.
Note: Download the latest driver and Stock Firmware File.
